|
ragecams Store SquareTrade © AP6.0 NEW MODEL# RAGECAMS-MAG21/23 1- POLY PRO ELASTIC BULLET TUBE CAM MAGNETIC MAGNET MOUNT CAMERA HOLDER SLEEVE FROM YOUR #1 HELMET CAM SOURCE. NEED ONE IN A LARGER DIAMETER? WE CUSTOM MAKE THESE TO FIT ANY DIAMETER RageCams. We custom designed this mount for easy super fast mounting to any metal surface. IT HOLDS GREAT & WILL NOT SCRATCH THE SURFACE THAT ITS MOUNTED TO. GREAT FOR 21-23MM DIAMETER TUBE CAMS, IF YOU HAVE A 19MM DIAMETER CAM YOU WILL NEED OUR RAGECAMS-MAG19 You can even use it on your helmet by installing-adhering a heavy duty magnet inside your helmet then use the mount on the outside. WE CARRY MORE MOUNTS, CAMERAS, & LENSES THAN ANY OTHER RESELLER IN THE WHOLE WORLD! SALES@QVCVIDEO.COM (616)887-6887 CUSTOM KITS AVAILABLE IF NEEDED. This auction is for 1 elastic 2 inch wide 5 inches long polypro bullet camera sleeve holder with a magnetic strip aligned with 7 pro industrial strength mini magnets coverd by thin stitched in elastic to protect scrathing of your ride, & can hold your bullet cam steady at speeds of up to 120mph+ (camera not included) Will fit snug any cam that measures a 7/8" inch in diameter(that is the most common diameter 21-23mm. WE ALSO STOCK THE NEW 19MM VERSION FOR OUR NEW MICRO RAGECAM 550. Tired of holding your video camera in hand to record action, or events? Buy a Mini high res Action Cam with true digital quality, and awesome clarity. We have the best deals in the world on mobile video systems. ?'s, just ask. hi-res bullet cam click the link below: http://cgi.ebay.com/Helmet-Cam-Sony-Vivid-Video-Lipstick-Bullet-Camera-KIT_W0QQitemZ9702752464QQcategoryZ48629QQcmdZViewItem Extra accessories available below for action cams To purchase a rechargeable 1600ma sealed slim 14hr battery pack click here: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=9707193010 We carry the widest selection of additional bullet cam lenses available! Field Of View Calculations: (Extreme wide angle fish eye view) 1.2mm lens has approximate 185 degree field of view (will fit with the lens cover off) 1.7mm lens has approximate 170 degree field of view (will fit with the lens cover off) 2.1mm lens has approximate 158 degree field of view (will fit with the lens cover off) 2.5mm lens has approximate 147 degree field of view (will fit with the lens cover off) 2.8mm lens has approximate 130 degree field of view (will fit with the lens cover off) 2.97mm lens has approximate 127 degree field of view(Human eye view) 3.6mm lens has approximate 92 degree field of view 4mm lens has approximate 88 degree field of view 6mm lens has approximate 78 degree field of view 8mm lens has approximate 58 degree field of view 12mm lens has approximate 28 degree field of view 16mm lens has approximate 19 degree field of view (will fit with the lens cover off) 25mm lens has approximate 13.3 degree field of view (will fit with the lens cover off) 50mm lens has approximate 7.8 degree field of view (will fit with the lens cover off)(License plate close up at 150ft) http://cgi.ebay.com/Helmet-Cam-Camera-Lenses-2-97-3-6-6-8-12-OR-16mm_W0QQitemZ5839541695QQcategoryZ48629QQcmdZViewItem Add plug & play power/video/audio cable below: 25ft. http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=5787961349 65ft.http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=5787961239 100ft.http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=5787960946 Gonna ski or ride dangerous??? Spare your $900.00 camcorder, & make this cam wireless audio & video up to 1000ft line of sight by clicking this link below. http://cgi.ebay.com/Wireless-1000Camera-Transmitter-Receiver-VC2M-Astrotel_W0QQitemZ5769040289QQcategoryZ48629QQcmdZViewItem Optional(not included)LANC remote control to power on & off & record/pause compatible camcorders. We use the Canon ZR30mc. Click this link below to purchase it now! Version 1.4 for mechanical VCR switching, or 1.6 for toggle/switch return to middle select position. Sony & Canon compatible if the L jack is there. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5856954818 To purchase the special FX remote, click the link below. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5864737222 KA-08 PTZ Special EFX Remote Control NOT INCLUDED! The optional (not included) Multi-Functional Effects Remote Control with RCA male connector is not needed to use or function the helmet camera! It does make the camera work to it's full capability though. When used it Offers: Digital Day/NightFeature Tele-Photo+PTZ (Pan-Tilt-) Will auto pan, & auto tilt on command when tele-photo/zoom is active. Brightness/Lighting filter Control for days to bright, or lower light conditions & a Cool Negative Inversion Effect. No battery required to power the remote. It will work with the cameras power. With the optional remote, this bullet cam amazingly will Digitally pan back and fourth, tilt up and down, and zoom in up to 3x. The Camera Itself will not move, only the video image will accept pan-tilt & zoom through the 130 degree field of view if you purchase the PTZ remote control. No other bullet cam on the market can do this. We also offer the RS485 model that will work through a digital video surveillance recorder, or over the net. Split 4 screen quad+switcher selector http://cgi.ebay.com/4-CAMERA-COLOR-SPY-QUAD-W-MOTION-DETECT-ALARM-ZOOM-FRZ_W0QQitemZ5838520269QQcategoryZ48636QQcmdZViewItem Connect 4 cams AV to this 12v switcher box. http://cgi.ebay.com/4-CAMERA-SECURITY-SWITCHER-AUDIO-VIDEO-WIRELESS-REMOTE_W0QQitemZ5879904498QQcategoryZ75397QQcmdZViewItem 2ch manual switcher boxes also available, & no power is needed to run it. Vari-Focal 4-8mm Version of this camera is also available for fine tuning your angle, & focus #HD353CWX http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=5848969195 JoyCoder PV-395 pocket mobile DVR AV recorderhttp://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=9702735401 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=9702752464 Lots of extras available for helmet cam kits, look below! Extra accessories available To purchase a rechargeable 1600ma sealed slim 14hr battery pack click here: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=9707193010 Since 1998! Quality Video Components Professionally Does Licensed Camera, & Network Digital Video Recording DVR Installations with many Nationwide, & Local references, serving Grand Rapids - Sparta - Belding - Greenville - Ionia - Cedar Springs - Rockford - Kentwood - Wyoming - Grandville - Caledonia - Holland - Hudsonville - South Haven - Muskegon - Kalamazoo - Manistee - Traverse City - Cadillac - Big Rapids, & All of West Michigan Q: What is EX-View CCD camera, What's good or bad about it A: "EX-View" is a sensitivity-enhancement technology developed by SONY to improve light sensitivity of its CCD by a factor of two for visible light and a factor of four for near-infrared wavelengths.EX-View is a proprietary SONY technology in which the P/N junction of each photodiode in the CCD matrix is specially fabricated to have much better photon-to-electron conversion efficiency. In addition, each photodiode (representing one pixel in an image) has a microscopic lens fabricated over it to better capture and focus light onto the active semiconductor junction. This results in an improvement in light sensitivity of 2 times for visible light and 4 times for near-infrared (800 ~ 900 nm) compared to the conventional CCD versions offered by SONY. The lux rating of the EX-View CCD is two times better than the premium SONY “Super HAD†CCD for both visible and near-infrared wavelengths. Q: What is Super HAD CCD camera? A: Super HAD CCD is a trademark of Sony Corporation. The Super HAD CCD is a version of Sony's high performance CCD HAD (Hole-Accumulation Diode) sensor with sharply improved sensitivity by the incorporation of a new semiconductor technology developed by Sony Corporation. Our various KT&C cameras come with SONY SUPER HAD CCD!!!Efforts for more pixels and smaller size for CCD have resulted in a smaller aperture area of sensor, presenting the problem of lower sensitivity. To improve this, a lens has been provided on the top of the sensor for focusing, which increases the virtual aperture area of the sensor for higher sensitivity. That is what is called the on-chip micro-lens. Sony, the first to adopt it for the CCD image sensor, has thus successfully achieved higher sensitivity.This "Super HAD CCD" optimizes the shape of on-chip micro-lenses in order to minimize the invalid area between micro-lenses on each pixel, which thereby minimizes the lost incident light. By doing so our product has been improved the sensitivity per unit of area, despite reducing the unit pixels.Comparison of Conventional CCD and Super HAD CCD Sensor Structure On-chip Micro-lens ofConventional CCD Conventional CCD Sensor Structure On-chip Micro-lens ofSuper HAD CCD Super HAD CCD SensorStructure Q: What is Rs 422, RS 485, comparison with RS 232. A: RS 232 is well-known due to popularity of today’s PC’s, unlike the RS422 and RS 485. These are used in industry for control systems and data transfers (small volumes, NO hundreds of Mb/s). So, what is the main difference between RS 232 and RS 422 & 485? The RS 232 signals are represented by voltage levels with respect to ground.There is a wire for each signal, together with the ground signal(reference for voltage levels). This interface is useful for point-to-point communication at slow speeds. For example, port COM1 in a PC can be used for a mouse, port COM2 for a modem, etc. This is and example of point-to-point communication: one port, one device. Due to the way the signals are connected, a common ground is required. This implies limited cable length ? about 30 to 60 meters maximum. (Main problems are interference and resistance of the cable.) Shortly, RS 232 was designed for communication of local devices, and supports one transmitter and one receiver. RS 422 & 485 uses a different principle: Each signal uses one twisted pair(TP) line-two wires twisted around themselves. We’re talking ‘Balanced data transmission’, or ‘Differential voltage transmission’. Simply, let’s label one of the TP wires ‘A’ and the other one ‘B’. Then, the signal is inactive when the voltage at A is negative and the voltage at B is positive.Otherwise, the signal is active, A is positive and B is negative. Of course, the difference between the wires A and B matters. For RS 422 & 485 the cable can be up to 1200 meters (4000 feet) long, and commonly available circuits work at 2.5 MB/s transfer rate. What is the difference between RS 422 and RS 485? Electrical principle is the same : both use differential transmitters with alternating voltages 0 and 5V. However, RS is intended for point-to-point communications, like RS 232. RS 422 is intended uses two separate TP wires, data can be transferred in both directions simultaneously. RS 422 is often used to extend a RS 232 line, or in industrial environments. RS 485 is used for multipoint communications: more devices may be connected to a single cable- similar to e.g ETHERNET networks, which use coaxial cable. Most RS 485 systems use Master/Slave architecture, where each slave unit has its unique address and responds only to packets addressed to this unit. These packets are generated by Master (e.g PC), which periodically polls all connected salve units. Q: What is super smear rejection? A: The left photo shows an image of a back illuminated rectangular aperture with an exposure time of 1ms in a stretched scaling (48-100 counts correspond to 0-255 gray levels). The white line indicates the position of the readout pixel row shown in the next graph. The right photo shows an image of the same aperture with the same scaling at 100ms exposure time and reduced back illumination. The resulting right image in general has the same intensity values like the left image If an interline-transfer-CCD-image sensor is read out, the generated charge carriers are transferred from the light sensitive part (photodiode) of a pixel to the shift register, which is next to the photodiodes and acts like a potential bucket. Because of the weak light sensitivity of these shift registers, they are shaded to prevent the additional generation of charge carriers. When the charge transfer to the shift registers is complete, they are shifted vertically row by row to the horizontal readout line, which is read out in a serial way. This vertical shift of row by row can be best compared with an endless conveyor belt process. With every shift step all registers are shifted by one register location including register rows that were already drained from the image. If an intense light source is imaged to the CCD-image sensor, this can generate unwanted charge carriers in the shadowed shift registers (mainly due to scattering of light on the CCD ship) in every line or row, which is shifted below the spot. This results in unwanted additional light signals, called “smearâ€, which can be recognized as bright vertical bands above and below the bright image spot. This phenomenon is more often seen at very short exposure times (because the light signal has to be intense to achieve a good image with a sufficient signal-to-noise ration) and is a characteristic of the corresponding CCD-image sensor. Q: Why IR Filter in Color Cameras necessary? A: An IR filter ? or IR cut filter - is a color filter blocking the infrared light. There are several good reasons for using an IR-cut filter. Using a color camera to achieve realistic colors in white light requires an IR-cut filter. The color spectrum seen by the human eye is quite limited compared to the spectrum seen by a CCD camera. Especially, in the near infrared region of the spectrum the difference in sensitivity is significant. This is important to know since many light sources, including the sun, emit infrared light. A CCD color camera in daylight without an IR-cut filter will therefore see a significant amount of infrared light resulting in strange colors. Another reason for using an IR-cut filter is the limited color correction for many lenses. It is difficult to design imaging optics covering both the visible spectrum and the near infrared spectrum at the same time. Therefore, many lenses have different depth of focus for the visible and the infrared spectrum. Anyway, the IR-cut filter cuts away a significant amount of the overall collected light and thereby affects the sensitivity in a negative way. In general, color cameras are one factor less sensitive compared to monochrome (depending on the CCD chip). This is primarily due to the IR-cut filter. Q: What is CMOS camera. What is it different from CCD camera? A: CMOS sensor is a kind of sensor that is normally 10 times less sensitivity then CCD sensor.As human eye can see object under 1 lux illumination (full moon night ). CCD sensor normally will see better or as good as human eye in the range of 0.1 ~3 lux and are 3 to 10 times more sensitive then CMOS sensor. Q: What is CMOS camera. What is it different from CCD camera? A: CMOS sensor is a kind of sensor that is normally 10 times less sensitivity then CCD sensor.As human eye can see object under 1 lux illumination (full moon night ). CCD sensor normally will see better or as good as human eye in the range of 0.1 ~3 lux and are 3 to 10 times more sensitive then CMOS sensor. Q: What is (IR)LED ? A: A light-emitting diode (LED) is a semiconductor device that emits visible light when an electric current passes through it. The light is not particularly bright, but in most LEDs it is monochromatic, occurring at a single wavelength. The output from an LED can range from red (at a wavelength of approximately 700 nanometers) to blue-violet (about 400 nanometers). Some LEDs emit infrared (IR) energy (830 nanometers or longer); such a device is known as an infrared-emitting diode (IRED).An LED or IRED consists of two elements of processed material called P-type semiconductors and N-type semiconductors. These two elements are placed in direct contact, forming a region called the P-N junction. In this respect, the LED or IRED resembles most other diode types, but there are important differences. The LED or IRED has a transparent package, allowing visible or IR energy to pass through. Also, the LED or IRED has a large PN-junction area whose shape is tailored to the application.Benefits of LEDs and IREDs, compared with incandescent and fluorescent illuminating devices, include:- Low power requirement: Most types can be operated with battery power supplies.·- High efficiency: Most of the power supplied to an LED or IRED is - converted into radiation in the desired form, with minimal heat production.·- Long life: When properly installed, an LED or IRED can function for decades. Q: What is WDR? A: Wide Dynamic Range(WDR) Technology uses two shutter speeds in alternative video fields, high and normal, and combines these two fields into one frame. It allows every detail to be captured accurately even if one portion is bright while other portions are dark. As a result, combined fields yield a frame of high quality images. Below is a comparison of camera technologies with its video images of Regular, Backlight Compensation (BLC), and Wide Dynamic Range. Q: What is optical low-pass filters(OLPF)? A: In high-quality digital maging systems, optical low-pass filters (OLPF) are used to eliminate color Moire fringes. An OLPF cuts off the lens MTF above the sampling frequency of the imager resulting an overall MTF curve that approximates a step function in spatial domain. IR cut-off function is often incorporated into OLPF as well. Q: How mechanical day and night cameras work? A: These cameras incorporate IR cut filters which automatically move over the CCD sensor for daytime(color) usage, to prevent IR light to the CCD. At night time, the filter will be removed automatically to bring in IR right to the CCD, and maximize the low light sensitivity with black and white image. Q&A on helmet cams we also have for sale. Q. I want to set up a head cam for a climb up Kilimanjaro,going from extreme hot to cold on the summit, so I need a helmet cam and compact storage device, and what battery set ups do I require to run the whole package? You also mention lenses, what are available How many hours will this 80 gig portable hard drive hold? I was not able to find it in your store. A. The 80hr recorder is 40 gigs. It has a rechargeable battery, & extra batteries are available. Each fully charged battery will run the dvr for 3 & 1/2 hours appx.The camera & mic will run for up to 12hrs on 8aa batteries. This one will work great for you as long as your camcorder or video recording device accepts audio/video inputs with a RCA single pin 1/8" input, that outputs to a 3 way RCA male cable(yellow is video, & red/white are audio) If you plug your camcorder to a tv set to view your video back in play mode, can you then switch your camcorder in record mode and record what is on the tv? If yes then this will work with your camcorder. The mini lenses available are 1.7mm---2.5---2.97---3.6---6---8---12---16---&---25mm. *It ships with a factory installed 3.6mm. However the lens cap/cover that seals the camera will not fit back over the 1.7mm, 2.5, 16, or 25mm lenses, so if you want to use one of these lenses for certain situations, make sure it is not raining,, & you will not risk ruining the camera. Does it come with a remote unit or is one available? a special effx remote, but will not turn your camcorder on and off. Is there any mfgr warranty on the unit? yes 1 year. Is this unit water-resistant? yes, but not submersible. Are there any accessories available for it? A head band, and extra lens covers. It comes with 2 different universal monting brackets that will fit any need. Does it come with a remote unit or is one available? It includes a special effx remote for digital day night, panning and zooming 3x digital, brightness, & a negative color inversion effect, but will not turn your camcorder on and off. We are currently looking into camcorder remotes. Is there any mfgr warranty on the unit? yes 1 year through us Quality Video Components/ KT&C CO. A: You need a camcorder for audio & video recording. This one will work great for you as long as your camcorder or video recording device accepts audio/video inputs. Q: Is this unit water-resistant? Are there any accessories available for it? Does it come with a remote unit or is one available? Is there any mfgr warranty on the unit? Dec-02-05 A: Is this unit water-resistant? yes, but not submersible. Are there any accessories available for it? A head band, and extra lens covers. It comes with 2 different universal monting brackets that will fit any need. Does it come with a remote unit or is one available? It includes a special effx remote for digital day night, panning and zooming 3x digital, brightness, & a negative color inversion effect, but will not turn your camcorder on and off. We are currently looking into camcorder remotes. Is there any mfgr warranty on the unit? yes 1 year through us Quality Video Components/ KT&C CO. Q: is there a helmet cam that can be used without a camcorder?i would like a helmet cam to use for atv racing ,street bike racing ,dune ridding.something that provides a glitch free video over very harsh terrain,all lighting conditions,thanks. Dec-02-05 A: no you would need a recorder. You could use a micro dvr with SD card. We carry an 80hr recorder dvr that works nice. Q: Hi I have some questions about the mini cams, and you seem to be the wright people to ask. First of all I would like to know if the bullet cams you sell are cameras themselves or are they to be connected to a camera, and if so are they compatible with the panasonic nv-gs400. Thanks for your answer in advanced. Dec-02-05 A: You need a camcorder for audio & video recording. This one will work great for you as long as your camcorder or video recording device accepts audio/video inputs with an RCA 3 way male cable(yellow is video, & red/white are audio) If you plug your camcorder to a tv set to view your video back in play mode, can you then switch your camcorder in record mode and record what is on the tv? If yes then this will work with your camcorder. If not then just head to the local pawn shop for a low cost recorder with audio/video inputs. Thanks Q: Hi, Does this model of helemt cam have an audio recorder built in and if not do you have anything which would allow audio recording in conjunction with this camera? Dec-02-05 A: you need to connect this to a camcorder. Thanks Q: Hi there, I am new to helmet cameras and I was wondering how good this one would be for snowmobiling. Dec-02-05 A: this one will work great for you, & includes 2 universal mounts. As long as your camcorder or video recording device accepts audio/video inputs with an RCA 3 way male end cable(yellow is video, & red/white are audio) If you plug your camcorder to a tv set to view your video back in play mode, can you then switch your camcorder in record mode and record what is on the tv? If yes then this will work with your camcorder. If not then just head to the local pawn shop for a low cost recorder with audio/video inputs. Thanks sales@qvcvideo.com Q: I'm new to these cameras and would like to use it to video hunting. How dose this camera campare to the hunt cam kits I see for more money. Thanks Bob Dec-01-05 A: this is just as good if not better. You may want to get an 8, or 12mm lens for detailed hunting applications depending on distance. It is easy to swap lenses on this camera. It has a money back guarantee! Thanks, Dennis sales@qvcvideo.com (616)887-6887 Q: i am new to cameras and i ride streetbike stunts and i wnat a helmet cam so is this a good one for that or do u have another one and how does it hook up is there wires hanging down and is it rechargeable and how do i transfer it to a tape tahnk you, tj Nov-29-05 A: You will need a camcorder or mini dv that accepts audio, and video inputs to record video. It will give a great image. run the wires down your back, or make it wireless, and transmit the signal to a camcorder. Thanks, Dennis Sales@qvcvideo.com (616)887-6887
Place a Bid!
|